switching from bolts to studs on my 76 128

Karfrik

Albert
Im thinking on switching my 128 from bolts to studs.I have my CD30's on it.So any idea what size studs i should go with?....thanks
 
Seems logical to me...

That you would need a stud that is as long or slightly longer than your current bolt. Just think of the head of the bolt being replaced by a nut, so the stud has to extend up into that nut, through it, and then a little bit further.

Pete
 
That you would need a stud that is as long or slightly longer than your current bolt. Just think of the head of the bolt being replaced by a nut, so the stud has to extend up into that nut, through it, and then a little bit further.

Pete

Thanks Pete!!,....and i need to call you to see when i can go to your place for the electronic ignition......
 
stud kit

Albert -

Having done this on my 128 and X, you are better off going a bit longer than minimum. You want at least eight threads in to the nuts.

Best,

Jim
 
stud kit length

Albert -

Having reviewed the invoices for three different kit orders earlier this year, they were 45mm and 52mm. Recommend you go with the latter.

Best,

Jim
 
Back
Top