Good luck...
You may have to adjust the throttle stop so that the vacuum advance line loses it's signal. This could mean the AAV is sticking open or there's another air leak.
Regardless, if the factory setting procedure doesn't work, just adjust the throttle until it works right, i.e. blocks the vacuum port. Could be something is bent or otherwise out of wack.
You may have to adjust the throttle stop so that the vacuum advance line loses it's signal. This could mean the AAV is sticking open or there's another air leak.
Regardless, if the factory setting procedure doesn't work, just adjust the throttle until it works right, i.e. blocks the vacuum port. Could be something is bent or otherwise out of wack.