johnph
True Classic
BUNDLE IS NOW $2500
I sold my 76 X 1/9 and here are the parts still in my garage. All parts are clean and ready to assemble. I need the space.
To finish the engine you will have to obtain a (preferably billet) camshaft and select a compression ratio to suit the cam.
1603cc 1500 X engine kit and most all the hardware to assemble it
1500 block bored to 87mm, polished Punto 67.4 crankshaft, COMETIC head gasket
new Wiseco 87mm forged pistons, new SCAT H beam rods
PBS 40mm big valve head newly overhauled, 31cc chambers, new 40mm intake valves, 8 new guides
new adjustable camshaft pulley, camdrive Strada cam and BOSCH 0237009004 distributor
Rebuilt & tested BOSCH 002050 & 002041 dists. 0237002129 dist with module and harness
Rebuilt 34 DAT and 34 DMTR carburetors, #4320518 intake manifold
1300 and 1500 cast iron exhaust manifolds, 3 phenolic spacers
With a stock camshaft and stock cast iron exhaust manifold, this will make a torquey 80hp DIN
81 main, air + idle jets (most are new), rebuild kits for 34 DAT + 34DMTR, 3 gasket sets for 32 DATRA + DMTRA
3 new rod bearing sets, one main bearing set, twelve 10mm crank plugs, two 16mm block plugs
1300 & 1500 gasket sets, COMETIC RACE 87.5mm head gasket, box of seals, block, manifold and waterpump gaskets
1300 transmission gasket set, 1500 transmission gasket set
9 pounds of valve shims, including 3.25 to 4.90 set plus 27 more 2.87 to 3.12
head nut wrenches, follower push tools, crankshaft pulley nut socket, clutch disc tools. Manuals
58mm underdrive crankshaft pulley $60, 83mm underdrive crankshaft pulley
crankfire ignition kit includes pickup, bracket and Howards Ignition module
Bayless Meaner Cleaner air filters, 54mm (2), 45mm (1), four 45mm clips, breather fitting for 45mm cleaner
X 1/9 intake manifold to single Weber DCN spacer (aluminum)
All of the above items are in the BUNDLE. $3200 cash. You have to pick it up and take it away SOON.
1976 X 4 speed 3.76 transaxle. Zero time on Bernice overhaul. New pinion shaft, reverse idler, bearings, synchro rings and sleeves and clutch slave. $1250 in new parts. $1750 or best offer.
Parts are in Sacramento, California, USA No international shipping. USA shipping extra for small parts only.
I sold my 76 X 1/9 and here are the parts still in my garage. All parts are clean and ready to assemble. I need the space.
To finish the engine you will have to obtain a (preferably billet) camshaft and select a compression ratio to suit the cam.
1603cc 1500 X engine kit and most all the hardware to assemble it
1500 block bored to 87mm, polished Punto 67.4 crankshaft, COMETIC head gasket
new Wiseco 87mm forged pistons, new SCAT H beam rods
PBS 40mm big valve head newly overhauled, 31cc chambers, new 40mm intake valves, 8 new guides
new adjustable camshaft pulley, camdrive Strada cam and BOSCH 0237009004 distributor
Rebuilt & tested BOSCH 002050 & 002041 dists. 0237002129 dist with module and harness
Rebuilt 34 DAT and 34 DMTR carburetors, #4320518 intake manifold
1300 and 1500 cast iron exhaust manifolds, 3 phenolic spacers
With a stock camshaft and stock cast iron exhaust manifold, this will make a torquey 80hp DIN
81 main, air + idle jets (most are new), rebuild kits for 34 DAT + 34DMTR, 3 gasket sets for 32 DATRA + DMTRA
3 new rod bearing sets, one main bearing set, twelve 10mm crank plugs, two 16mm block plugs
1300 & 1500 gasket sets, COMETIC RACE 87.5mm head gasket, box of seals, block, manifold and waterpump gaskets
1300 transmission gasket set, 1500 transmission gasket set
9 pounds of valve shims, including 3.25 to 4.90 set plus 27 more 2.87 to 3.12
head nut wrenches, follower push tools, crankshaft pulley nut socket, clutch disc tools. Manuals
58mm underdrive crankshaft pulley $60, 83mm underdrive crankshaft pulley
crankfire ignition kit includes pickup, bracket and Howards Ignition module
Bayless Meaner Cleaner air filters, 54mm (2), 45mm (1), four 45mm clips, breather fitting for 45mm cleaner
X 1/9 intake manifold to single Weber DCN spacer (aluminum)
All of the above items are in the BUNDLE. $3200 cash. You have to pick it up and take it away SOON.
1976 X 4 speed 3.76 transaxle. Zero time on Bernice overhaul. New pinion shaft, reverse idler, bearings, synchro rings and sleeves and clutch slave. $1250 in new parts. $1750 or best offer.
Parts are in Sacramento, California, USA No international shipping. USA shipping extra for small parts only.
Attachments
Last edited:
